Turn And Lane-Change Signals - Mazda 5 Manual

Mazda5_8CN3-EA-12I_Edition1 Page184
Tuesday, September 4 2012 1:23 PM
Driving Your Mazda
Switches and Controls
Select the proper headlight angle from the following
chart.
Front seat
Rear
*1
seat
Driver Passenger
×
× ×
× × ×
× × ×
×
×: Yes
: No
*1 Second-row and third-row seats
qDaytime Running Lights (Canada)
In Canada, vehicles must be driven with
the headlights on during daytime
operation.
For that reason, the daytime running lights
automatically turn on when the ignition is
switched ON.
NOTE
The Daytime Running Lights turn off when the
parking brake is applied.
5-60
Form No.8CN3-EA-12I
Turn and Lane-Change
Signals
Switch
Load
Position
Turn Signals
0
Move the signal lever down (for a left
0
turn) or up (for a right turn) to the stop
1
position. The signal will self-cancel after
× 2
the turn is completed.
× 3
If the indicator light continues to flash
after a turn, manually return the lever to
its original position.
Green indicators on the dashboard show
which signal is working.
Lane-change signals
Move the lever slightly toward the
direction of the change
indicator flashes
will return to the off position when
released.
NOTE
l
l
Black plate (184,1)
Right lane change
Left lane change
until the
and hold it there. It
If an indicator light stays on without
flashing or if it flashes abnormally, one of
the turn signal bulbs may be burned out.
A personalized function is available to
change the turn indicator sound volume.
Refer to Personalization Features on page
10-8.
Right turn
OFF
Left turn