Mazda 5 Manual page 376

Mazda5_8CN3-EA-12I_Edition1 Page376
Tuesday, September 4 2012 1:25 PM
Maintenance and Care
Owner Maintenance
NOTE
To replace the bulb, contact an Authorized
l
Mazda Dealer
If the halogen bulb is accidentally touched,
l
it should be cleaned with rubbing alcohol
before being used.
Use the protective cover and carton of the
l
replacement bulb to dispose of the old bulb
promptly out of the reach of children.
Front turn signal lights/Front side-
marker lights/Parking lights
1. Make sure the ignition is switched off,
and the headlight switch is off.
2. Lift the hood.
3. Turn the socket and bulb assembly
counterclockwise and remove it.
4. Remove the bulb by pressing it in
slightly and turning it
counterclockwise.
5. Install the new bulb in the reverse order
of the removal procedure.
í
Side turn signal lights
Due to the complexity and difficulty of
the procedure, the LED bulbs must be
replaced by an Authorized Mazda Dealer.
í
8-46
Some models.
Form No.8CN3-EA-12I
Black plate (376,1)
NOTE
LED bulb replacement is not possible because
it is built into the unit. Replace the unit.
Brake lights/Taillights/Rear side-
marker lights, Rear turn signal lights
1. Make sure the ignition is switched off,
and the headlight switch is off.
2. Turn the bolts counterclockwise and
remove them.
3. Pull the upper part of the cover around
the clip outward to detach the clip.
Clip