United States - LG CodePlus OAT100R Installation & Setup Manual

Configuration Options via Command Line (Cont.)
Set the Time Zone
Note: See "Set the Date and Time" on the following page for information on setting the date
and time for the OAT100R.
1. At the Setup Command > prompt, type tz and press Enter.
The system displays the current time zone information for the OAT100R and prompts you
to specify whether or not you wish to change the time zone.
Current time zone is: America/New York
Change the time zone? [y/n]:
2. Either:
• Type n and press Enter to return to the Setup Command > prompt without changing the
current time zone.
• Type y and press Enter to change the time zone. Then, continue with step 3.
3. The system will display the following prompt for a location, followed by a list of options:
Please identify a location so that time zone rules can be set correctly.
Please select a continent or ocean.
At the #? prompt, type the number that corresponds to the appropriate option for your
location, and then press Enter.
4. The system will display the following prompt for a country, followed by a list of options:
Please select a country.
At the #? prompt, type the number that corresponds to the appropriate option for your
country, and then press Enter.
5. The system will display the following prompt for a region, followed by a list of options:
Please select one of the following time zone regions.
At the #? prompt, type the number that corresponds to the appropriate option for your
region, and then press Enter.
After you specify the time zone region, the system displays an overview of your location
selections and prompts for confirmation, for example:
The following information has been given:

United States

Central Time
Therefore TZ='America/Chicago' will be used.
Local time is now:
Universal Time is now:
Is the above information OK?
1) Yes
2) No
#?
206-4218
Wed Oct 17 16:23:10 CST 2012.
Wed Oct 17 22:23:10 UTC 2012.
(Continued on next page)
59