Tuner Menu Options - LG CodePlus OAT100R Installation & Setup Manual

Configuration Options via GUI (Cont.)
From the Tuner Information screen, you can click on a tuner channel number to access the
Tuner Menu for the selected tuner. Refer to "Tuner Menu Options" on pages 26 to 28 for
information on the Tuner Menu.
To view the tuner information data at any time while you are working in the web GUI, click on
Tuner Info in the options panel at the left of the screen.
Note: If a tuner is powered off, the Power State column in the Tuner Information screen will
indicate "Off," and the Bitrates column will show "N/A." The Bitrates column of the System
Status screen will also show "N/A" to reflect the powered off status of the tuner.

Tuner Menu Options

The Tuner Menu screen enables you to view and/or modify tuner configuration. To access the
Tuner Menu for a selected tuner, either:
• Click on the desired tuner channel number in the System Status or Tuner Information
screen, or
• Click on Tuner Menu in the options panel at the left of the screen, and then select the
appropriate tuner number from the submenu (see example below).
On the left side of the Tuner Menu screen, an Information section displays tuner status and
configuration data, including the tuner channel number, the power and signal lock status of
the tuner, the tuner signal-to-noise ratio, the FEC error count, and the output stream number.
Note: Output streams are mapped in the MUX Setup screen. See "MUX Setup Options" on
page 35 for further information.
On the right side of the Tuner Menu screen, several menu options are available, as described
in the following subsections.
26
206-4218