LG CodePlus OAT100R Installation & Setup Manual page 37

Update the OAT100R Firmware
The appropriate update file must be provided by LG. The system will not download an
improper file.
1. In the Firmware Update section of the Maintenance screen, either click on the Browse
button at the right of or simply click in the Filename field, and navigate to/select the
appropriate file from the File Upload pop-up window.
2. Once you have selected the appropriate file, click on the Upload button below the Filename
field to initiate the firmware update.
3. The system will display a pop-up window prompting for confirmation to update the system.
Either:
• Click OK to continue.
• Click Cancel to return to the Maintenance screen without updating the OAT100R
firmware.
If you opt to proceed, the system will initiate the firmware update, and progress and results
messages will be displayed in the Result section at the bottom of the screen, for example:
4. When the firmware update is finished, click on the Reset button in the System Reset
section of the Maintenance screen to reset the system (see "Reset the System" on the
following page for further information).
Check Firmware Update Status
In the Firmware Update section of the Maintenance screen, click on the Status button to
check the current firmware update status.
The system will display firmware update status (for example, "Firmware Update finished" or
"Firmware Update is in progress") in the Result section at the bottom of the screen. If a
firmware update has never been performed on this system, the Result display will show:
206-4218
Configuration Options via GUI (Cont.)
37