View The System Program Map - LG CodePlus OAT100R Installation & Setup Manual

Configuration Options via Command Line (Cont.)
Example: System Monitor Display
SYSTEM MONITOR
Date: 2012-10-17 16:44:27
Output: RF 256-QAM-B
Bitrates (Mbps):
------+-------+-----+------+------+------+-----+--------
Tun | RF In | SNR | Errs | Lck | Out | Str | RF Out
------+-------+-----+------+------+------+-----+--------
1 | 50 |
2 | 12 |
3 | 19 |
4 | 21 |
5 | 27 |
6 | 29 |
7 | 31 |
8 | 47 |
------+-------+-----+------+------+------+-----+--------
Use a parameter for auto-refresh, e.g. type: "monitor 1"

View the System Program Map

1. Log in to the OAT100R as described on page 39.
2. At the Command > prompt, type map and press Enter.
The System Program Map display shows program assignments for each tuner, for example:
SYSTEM PROGRAM MAP
Date: 2012-10-17 12:28:41
SN: 201-12301011
Version: 1.9
HWID: 11-20
Output: RF 64-QAM-B
-----+------------+-----+--------
Tun | RF In-Prog | Str | RF Out
-----+------------+-----+--------
8 | 38-1
7 | 36-1
7 | 36-2
7 | 36-4
6 | 31-3
5 | 29-5
5 | 29-6
-----+------------+-----+--------
206-4218
25 | 0 | Yes | 15.7 |
33 | 0 | Yes | 13.4 |
29 | 0 | Yes | 18.4 |
32 | 0 | Yes | 16.3 |
26 | 0 | Yes | 18.6 |
31 | 0 | Yes | 17.0 |
33 | 0 | Yes | 15.1 |
29 | 0 | Yes | 18.2 |
| 1 | 2-1
| 2 | 3-1
| 2 | 3-2
| 2 | 3-3
| 3 | 4-1
| 4 | 5-1
| 4 | 5-2
1 | 3-1 :)
2 | 3-11 :)
3 | 4-1 :)
4 | 4-11 :)
5 | 5-1 :)
6 | 5-11 :)
7 | 6-1 :)
8 | 6-11 :)
41