LG CodePlus OAT100R Installation & Setup Manual page 52

Configuration Options via Command Line (Cont.)
(Continued from previous page)
After you specify the Pro:Idiom messages setting, the system will display an overview of the
new configuration and prompt for confirmation, for example:
New PID Configuration
Program PIDs range:
Pro:Idiom PIDs range:
Send Pro:Idiom messages:
Do you want to save the new configuration? [y/n]:
5. Either:
• Type y and press Enter, to save the new configuration. The system will confirm the
configuration update:
New configuration has been saved.
• Type n and press Enter to return to the Setup Command > prompt without saving your
changes.
Configure the Control Port
1. At the Setup Command > prompt, type setip and press Enter.
The system displays an overview of the current TCP/IP network configuration followed by
the Network Configuration Menu, for example:
Current Network Configuration
Interface controller port
Host name:
Using DHCP:
DNS servers
Primary DNS:
Secondary DNS:
--------------------------
Network Configuration Menu
--------------------------
ip Configure Control Port IP
dns Configure DNS
exit Exit network configuration
Choose item to modify >
52
0x30 - 0x6f
0x1051 - 0x1058
no
oat100r
YES
68.94.156.1
68.94.157.1
(Continued on next page)
206-4218