Timer Settings - Lanier LD1110 Settings Manual

System Settings
❖ Interleave Print
• The set values of the main and sub-machines do not affect the combined
copying.
❖ Output: Copier
• The main and sub-machines follow their respective set values.
❖ Output: Document Server
2
• The main and sub-machines follow their respective set values.
❖ Output: Printer
• The main and sub-machines follow their respective set values.
❖ ADF Original Table Elevation
• The main machine follows the values that are set in it. The set values of the
sub-machines do not affect the combined copying.
❖ System Status/Job List Display Time
The main and sub-machines follow their respective set values.
❖ Key Repeat
• The main and sub-machines follow their respective set values.
❖ Z-fold Position
• The main and sub-machines follow their respective set values.
• Make the same settings on both machines.

Timer Settings

How the defaults in the Timer Settings of copying of the main and sub-machines
are used in combined copying will be explained.
❖ Auto Off Timer
• The main machine follows the values that are set in it. The set values of the
sub-machines do not affect the combined copying.
❖ Energy Saver Timer
• The set values of the main and sub-machines do not affect the combined
copying.
• In Connect Copy mode, neither machine will enter Energy Saver modes
(Low Power mode, or Energy Saver mode).
84