Using Utilities To Make Settings - Lanier LD1110 Settings Manual

Heading
interface settings/Network
interface settings/Network
interface settings/
IEEE 802.11b
interface settings/
IEEE 802.11b
interface settings/
IEEE 802.11b
interface settings/
IEEE 802.11b
interface settings/
IEEE 802.11b
Note
❒ As to [Effective Protocol], check if the protocol to use is set as [Active].
❒ [IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN inter-
face board is installed. When both Ethernet and wireless LAN (IEEE 802.11b)
are connected, the selected interface takes precedence.
Reference
p.52 "Interface Settings"
p.62 "File Transfer"

Using Utilities to Make Settings

The network settings can be specified not only on the machine's control panel
but also using utilities such as Web Image Monitor, SmartDeviceMonitor for Ad-
min, and telnet.
Note
❒ For details about using Web Image Monitor, see "Using Web Image Monitor",
Network Guide.
❒ For details about using SmartDeviceMonitor for Admin, see "Using SmartDe-
viceMonitor for Admin", Network Guide.
❒ For Details about using telnet, see "Remote Maintenance", Network Guide.
Reference
"Using Web Image Monitor" Network Guide
"Using SmartDeviceMonitor for Admin" Network Guide
"Remote Maintenance by telnet" Network Guide
Setting Item
Permit SSL/TLS Communication
Host Name
Communication Mode
SSID Setting
Channel
Security Method
Transmission Speed
Network Settings
Setting Requirements
As required
As required
Mandatory
As required
As required
As required
As required
1
33