Lanier LD1110 Settings Manual page 37

IEEE 1394 (IPv4 over 1394)
This section describes necessary set items for using network TWAIN Scanner
with IEEE 1394 interface cable.
For details about specifying the settings, see "Interface Settings" and "File Transfer".
Heading
interface settings/IEEE 1394 IPv4 Address
interface settings/IEEE 1394 DDNS Configuration
interface settings/IEEE 1394 Host Name
interface settings/IEEE 1394 Domain Name
interface settings/IEEE 1394 WINS Configuration
interface settings/IEEE 1394 IPv4 over 1394
interface settings/Network
interface settings/Network
interface settings/Network
Note
❒ [IEEE 1394] is displayed when optional IEEE 1394 interface board is installed.
❒ As to [Effective Protocol], check if the protocol to use is set as [Active].
Reference
p.52 "Interface Settings"
p.62 "File Transfer"
Setting Item
IPv4 Gateway Address
DNS Configuration
Effective Protocol
Network Settings
Setting Requirements
Mandatory
As required
As required
As required
As required
Mandatory
As required
As required
Mandatory
1
29