Lanier LD1110 Settings Manual page 147

Inch version:
• "Top Left"...T/B: 0.1-5.7", L/R: 0.1-5.7"
• "Top Center"...T/B: 0.1-5.7", L/R: 2.8-2.8"
• "Top Right"...T/B: 0.1-5.7", L/R: 0.1-5.7"
• "Center Left"...T/B: 2.8-2.8", L/R: 0.1-5.7"
• "Center"...T/B: 2.8-2.8", L/R: 2.8-2.8"
• "Center Right"...T/B: 2.8-2.8", L/R: 0.1-5.7"
• "Bottom Left"...T/B: 0.1-5.7", L/R: 0.1-5.7"
• "Bottom Center"...T/B: 0.1-5.7", L/R: 2.8-2.8"
• "Bottom Right"...T/B: 0.1-5.7", L/R: 0.1-5.7"
• Dup. Back Pg. Stamp Pos.
You can adjust the stamp position for back side in duplex mode, within the
available range as shown below.
Metric version:
• Left-Right: Left 432 mm – Right 432 mm
• Top-Bottom: Top 432 mm – Bottom 432 mm
Inch version:
• Left-Right: Left 17.0" – Right 17.0"
• Top-Bottom: Top 17.0" – Bottom 17.0"
❖ Superimpose
You can have page numbers printed in white when they overlap black parts
of the image.
• On
• Off
❖ Page Numbering Initial Letter
Switch the page print language.
• P1, P2, ... / P.1, P.2 ...
• S1, S2, ... / S.1, S.2 ...
Stamp
4
139