Lanier LD1110 Settings Manual page 106

Tray Paper Settings
❖ Thick Paper Setting
• On
• Off
❖ Designation Sheet 1 - 9
You can specify and display the paper tray to set designation sheets. You can
also specify the display time and copying method for two sided copying.
• Display Time
You can select [At Mode Selected] or [Full Time].
• Copying Method in Duplex
3
You can select [2 Sided Copy] or [1 Sided Copy].
Copy Method in Duplex is enabled only when you select [At Mode Select-
ed] in Display Time.
❖ Front Cover
You can specify and display the paper tray to set front cover sheets. You can
also specify the display time and copying method for two sided copying.
• Display Time
You can select [At Mode Selected] or [Full Time].
• Copying Method in Duplex
You can select [2 Sided Copy] or [1 Sided Copy].
Copy Method in Duplex is enabled only when you select [At Mode Select-
ed] in Display Time.
❖ Back Cover
You can specify and display the paper tray to set back cover sheets. You can
also specify the display time and copying method for two sided copying.
• Display Time
You can select [At Mode Selected] or [Full Time].
• Copying Method in Duplex
You can select [2 Sided Copy] or [1 Sided Copy].
Copy Method in Duplex is enabled only when you select [At Mode Select-
ed] in Display Time.
❖ Slip Sheets
You can specify and display the paper tray in which to set slip sheets. You
can also specify the display time.
• Display Time
You can select [At Mode Selected] or [Full Time].
❖ Separation Sheets
You can specify and display the paper tray in which to set slip sheets. You
can also specify the display time.
• Display Time
You can select [At Mode Selected] or [Full Time].
98