Table of Contents
Advertisement
System Settings
❖ Z-fold position
Set the folding-back position in units of 1 mm when you specify Z-folding.
The machine is shipped from the factory with this value set to 2 mm (metric
version) or 0.1 inch (inch version).
The setting range of the folding position for each paper size is given below:
• Metric version
• A3: 2 - 25 mm
2
• B4 JIS: 2 - 40 mm
• A4: 2 - 10 mm
• 11 × 17: 2 - 20 mm
• 8
/
1
• Inch version
• A3: 0.1 - 1.0 inch
• B4 JIS: 0.1 - 1.6 inch
• A4: 0.1 - 0.4 inch
• 11 × 17: 0.1 - 0.8 inch
• 8
/
1
Note
❒ If the Panel Key Sound setting is [Off], the beeper does not sound, whatever
the Warm Up Notice setting.
❒ The Function Reset Timer setting is ignored if Interleave is set for Print Prior-
ity.
Reference
p.3 "Accessing User Tools (System Settings)"
"Function Compatibility", Copy/Document Server Reference
Output tray settings
Important
❒ You cannot interrupt the current stapling job even if a stapling job is specified
by a different function.
❒ When the 3000-sheet finisher or booklet finisher are installed and stapling or
shift sorting are specified for a job, the job will be delivered to the finisher
shift tray regardless of the output tray specified.
❒ Paper that is fed from the bypass tray cannot be delivered to finisher trays.
48
× 14: 2-35 mm
2
× 14: 0.1 - 1.4 inch
2
Advertisement
Table of Contents
