Lanier LD1110 Settings Manual page 24

Connecting the Machine
Heading
interface settings/Network
Note
1
❒ IPv6 can be used only for the printer function.
❒ In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒ [LAN Type] is displayed when optional wireless LAN board is installed. If Eth-
ernet and IEEE 802.11b (wireless LAN) are both connected, the selected inter-
face has priority.
Reference
p.52 "Interface Settings"
p.62 "File Transfer"
IEEE 1394 (IPv4 over 1394)
This section describes necessary set items for using Printer with IEEE 1394 inter-
face cable.
For details about specifying the settings, see "Interface Settings" and "File Transfer".
Heading
interface settings/IEEE 1394 IPv4 Address
interface settings/IEEE 1394 DDNS Configuration
interface settings/IEEE 1394 Host Name
interface settings/IEEE 1394 Domain Name
interface settings/IEEE 1394 WINS Configuration
interface settings/IEEE 1394 IPv4 over 1394
interface settings/Network
interface settings/Network
interface settings/Network
Note
❒ [IEEE 1394]appears when optional IEEE 1394 interface board is installed.
❒ As to [Effective Protocol], check if the protocol to use is set as [Active].
Reference
p.52 "Interface Settings"
p.62 "File Transfer"
16
Setting Item
Machine Name
Setting Item
IPv4 Gateway Address
DNS Configuration
Effective Protocol
Setting Requirements
As required
Setting Requirements
Mandatory
As required
As required
As required
As required
Mandatory
As required
As required
Mandatory