Lanier LD1110 Settings Manual page 38

Connecting the Machine
IEEE 802.11b (wireless LAN)
This section describes necessary set items for using network TWAIN Scanner
with IEEE 802.11b (wireless LAN).
1
For details about specifying the settings, see "Interface Settings" and "File Transfer".
Heading
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/Network
interface settings/
IEEE 802.11b
interface settings/
IEEE 802.11b
interface settings/
IEEE 802.11b
interface settings/
IEEE 802.11b
interface settings/
IEEE 802.11b
Note
❒ As to [Effective Protocol], check if the protocol to use is set as [Active].
❒ [IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN inter-
face board is installed. When both Ethernet and wireless LAN (IEEE 802.11b)
are connected, the selected interface takes precedence.
Reference
p.52 "Interface Settings"
p.62 "File Transfer"
30
Setting Item
Machine IPv4 Address
IPv4 Gateway Address
DNS Configuration
DDNS Configuration
Domain Name
WINS Configuration
Effective Protocol
LAN Type
Permit SNMPv3 Communication
Permit SSL/TLS Communication
Host Name
Communication Mode
SSID Setting
Channel
Security Method
Transmission Speed
Setting Requirements
Mandatory
As required
As required
As required
As required
As required
Mandatory
Mandatory
As required
As required
As required
Mandatory
As required
As required
As required
As required