Lanier LD1110 Settings Manual page 146

Copier/Document Server Features
❖ Page Numbering in Combine
You can set page numbering when using the Combine function and the Page
Numbering function together.
• Per Original
• Per Copy
❖ Stamp on Designating Slip Sheet
You can select to print the page number onto slip sheets when using the Des-
ignate function set to [Copy] and the Page Numbering function together.
• On
• Off
❖ Stamp Position
You can specify how each of stamp is printed.
4
• Stamp Position
You can specify where to print the stamp.
• Top Left
• Top Center
• Top Right
• Bottom Left
• Bottom Center
• Bottom Right
For the patterns of "P1, P2, ---", "1/5, 2/5, ---", "P.1, P.2, ---", "1, 2, --", and "Page
1, Page 2, ---", the machine is shipped from the factory with this position set
to "Top Right".
For the patterns of "-1-, -2-, ---" and "1-1, 1-2, --- ", the machine has this position
set to "Bottom Center".
The setting range is as follows:
• Stamp Position
You can adjust the print position of the stamp within the available range
as shown below.
Metric version:
• "Top Left"...T/B: 4-144mm, L/R: 4-144mm
• "Top Center"...T/B: 4-144mm, L/R: 72-72mm
• "Top Right"...T/B: 4-144mm, L/R: 4-144mm
• "Center Left"...T/B: 72-72mm, L/R: 4-144mm
• "Center"...T/B: 72-72mm, L/R: 72-72mm
• "Center Right"...T/B: 72-72mm, L/R: 4-144mm
• "Bottom Left"...T/B: 4-144mm, L/R: 4-144mm
• "Bottom Center"...T/B: 4-144mm, L/R: 72-72mm
• "Bottom Right"...T/B: 4-144mm, L/R: 4-144mm
138