Getting Started - X-TREME X-600 Owner's Manual

PACKAGE CONTENTS
Your X-Treme X-600 comes with the following items in the box. Please locate
all of the following:
1. X-Treme X-600 Scooter
2. 36V Battery Charger
3. Tool Kit User Manual and 20amp Fuses
4. Seat
5. Seat Post & Clamp

GETTING STARTED

Please read and understand these instructions and the OPERATING
PROCEDURES section, prior to starting or riding your X-600
Assembly
1. Carefully remove the X-600 from the box.
2. To unfold the X-600, begin by pressing
down on the FOLDING HANDLE with one
hand while gently pulling up on the
handlebars with the other.
3. Fully extend the handlebars to their upright
position until you feel the mechanism lock
into place.
4. Attach the handlebars by inserting the
silver handlebar clamp onto the handlebar
post stopping just below the top. Be sure
to orient the bars in the correct riding
position with the throttle on the rider's right
side. Secure the handlebars to the post
by tightening the bolts on the clamp with
the enclosed Allen wrench as shown.
5. Secure the hand brakes in place by using
the provided Allen Wrench to first loosen
the tension bolts. Adjust the levers to a
comfortable position and tighten the bolts.
*BE CAREFUL NOT TO PULL ON THE
CABLES!
Page7