Package Contents; Getting Started; Assembly; Gas Tank Installation - X-TREME XG-499 Product Handbook

PACKAGE CONTENTS

Your X-Treme XG-499 comes with the following items in the box. Please locate
all of the following:
1. The X-Treme XG-499 Gas Scooter
2. Allen Wrench
3. Spark Plug Wrench
4. Product Handbook
5. Fuel Tank and lines
6. Tool Kit

GETTING STARTED

Please read and understand these instructions and the OPERATING
PROCEDURES section, prior to starting or riding your XG-499
Installing the fuel tank
The fuel tank on the XG-499 does not come fully installed from the factory, so it is
necessary to install it before initial use.
The fuel system consists of the carburetor; fuel tank, fuel supply line and the fuel return
line.
To install the tank:

Assembly

1. Carefully remove the XG-499 from the box.
2. Insert the handlebar down tube over the
front fork completely until the gold pin
snaps into place. Slide the clamp down to
the base of the tube and tighten the two
bolts securely. (Fig.1)
3. Attach the handlebars by first attaching the
large handlebar clamp to the top of the
handlebar down tube.
handlebars to the clamp. Tighten all bolts
after adjusting the handlebars to the
desired tilted position. (Fig. 2)
4. The BRAKE LEVER is in the down position
for shipping. Using the provided Allen
Wrench, loosen the tension bolt, and adjust
the levers to a comfortable position.
*BE CAREFUL NOT TO PULL ON THE
CABLES!
Page8
Then attach the