Bicycle Assembly; Getting Started - X-TREME Rubicon 48V Owner's Manual

If your charger shows a solid green light after charging for a short period of time, your battery may have been only partially dis- charged (short ride),
or this may be the sign of a partially worn out battery with reduced storage capacity. Continue charging for the full time, to cover all the bases. If the
battery still has not charged, you may need to replace it.
Even with proper care, a rechargeable battery does not last forever. Average battery life depends on use and conditions.
The charger and charger port should be regularly inspected for damage (cord, plug, enclosure, etc.).
!
if damage is found stop using the affected part until the it can be repaired or replaced.

Bicycle assembly

Assembly Guides
Follow the assembly guide contained within this manual or visit
We recommend that you contact X-Treme if you have doubts or concerns as to your experience or ability to properly assembly,
!
repair, or maintain your bicycle
13
www.x-tremescooters.com/support/

Getting Started

Open the carton from the top and remove the bicycle. Remove the
straps and protective wrapping from the bicycle. Inspect the bicycle and all accessories and parts for
possible shortages. It is recommended that the threads and all moving parts in the parts package be
lubricated prior to installation. Do not discard packing materials until assembly is complete to
insure that no required parts are accidentally discarded.
**Note: Your bicycle may be equipped with different style components than the ones illustrated
within this manual.
for assistance.