Packing Contents; Getting Started; Assembly - X-TREME X-370 Owner's Manual

PACKAGE CONTENTS
Your X-Treme X-370 comes with the following items in the box. Please locate
all of the following:
1. The X-Treme X-370 Scooter
2. 36V Battery Charger
3. Tool Kit
4. Seat & Seat Post
5. Front Wheel & Axle
6. Trunk with Keys & mounting hardware
7. Trunk Rack & mounting nuts/bolts
8. Spare Fuse(s)
9. Product Handbook
10. Footplate nuts/bolts & washers
11. 1 Handlebar clamp & 1 seat post/trunk rack clamp
12. Footpad Decals

GETTING STARTED

Please read and understand these instructions and the OPERATING
PROCEDURES section, prior to starting or riding your X-760
Fig. 1
Fig. 2
Fig. 3

Assembly

1. Carefully remove the X-370 from the box.
2. Install the front wheel and axle. (Fig. 1)
3. Attach the T-handlebar to front fork/wheel
and tighten clamp securely at the base.
Insert both left and right handlebars by
inserting and then tightening the black bolt.
(Fig. 2)
4. Secure the footplate to the frame using the
4 enclosed footplate nuts, bolts and rubber
washers then apply footplate decals.
5. Insert the seat post and seat into the seat
post receiver, and then install the trunk rack
to the rear of the scooter. Tighten the seat
post clamp securely. (Fig. 3)
6. Optionally, attach the trunk to the trunk rack
using the enclosed trunk hardware.
For more detailed assembly / disassembly
instructions go to page 14.
8