Installation
Installation Warnings:
!
Failure to follow all of the requirements may result in property damage, bodily
injury, or even death.
!
This heater must be installed by a qualified installer who has gone through a
training program for the installation of direct vent gas appliances.
!
This appliance must be installed in accordance with all local codes, if any; if not, in
U.S.A. follow ANSI Z223.1 and NFPA 54(88), in Canada follow B-149.
!
In Manufactured or Mobile Homes must confirm with: In USA, Manufactured Home
Construction and Safety Standard, Title 24 CFR, Part 3280; In Canada, CSA Z240.4
and Gas-Equipped Recreational Vehicles and Mobile Housing.
be installed in Manufactured Housing only after the home is site located.
!
The 36DV is designed to operate on natural gas, or propane (LP).
All exhaust gases must be vented outside the structure of the living-area.
Combustion air is drawn from outside the living-area structure.
!
Notify your insurance company before hooking up this fireplace.
!
The requirements listed below are divided into sections.
met simultaneously.
should follow the procedure best suited for the installation.
Packing List
•
Propane Conversion Kit
•
Log Set (Log Set, Coals, & Pins)
•
Flex Tube with Pipe Adapter
•
Glass Latch Tool (to un-latch glass frame)
•
Arch Covers (for arched faces only)
Installation Overview
Travis Industries
(for qualified installers only)
The order of installation
Additional Items Required
•
•
•
•
4040708
All requirements must be
is not rigid – the qualified installer
Faceplate (gold or black) - Includes attachment screws
Direct Vent (Simpson Dura-Vent Ph. # 800 835-4429)
Gas Line Equipment (shutoff valve, pipe, etc.)
Electrical Equipment (min. 18 gauge, grounded line)
This appliance may
1 0 0 - 0 1 1 6 0
7