Select Control Profile Pre-Defined - Salus T105 RF Instruction Manual

16 17
ii) Select Control profile
pre-defined
1. Press the SET PROGRAM button again, the day
indicator stop flashing and the program number
starts flash.
2. Press the
UP or
DOWN
button to
select the
program
profile.
P1-P6 are
predefined
program,
their profile
are shown
as follows.
3. If any of these programs is selected, press the
SET PROGRAM button again to confirm this
program for the specified day and return to
mode.
normal operation
4. Press the button to toggle the control
temperature setting and advance the setting
hour digit by one.
Example:
button is pressed. Hour Digit (Clock) is 2 and
the 02 hour bar is flashing. icon is on and the
operation mode for hour 01 is set to economic mode.
5. Press the button to terminate the setting
procedure and to return to normal operation mode.
Example:
button is pressed.Terminate the setting
procedure and the new control profile is :
6. The setting procedure will terminate automatically
when no button is pressed for 10 seconds.
18