Primary Dhd Controller; Front Panel Layout; Primary Dhd Controller Front Panel - Runco 3Dimension D-73d Ultra Installation & Operation Manual

5. ERROR LED (Left-Eye Engine)
Indicates left-eye engine error conditions as follows:
• Flashing red = Over temperature, user intervention (clear vents, turn on AC) may fix
problem
• Solid red = Error that requires servicing (fan failure, Power-on Self-Test (POST)
failure).
6. ERROR LED (Right-Eye Engine)
This LED operates identically to the ERROR LED on the left-eye engine.
7. STANDBY LED (Right-Eye Engine)
This LED operates identically to the STANDBY LED on the left-eye engine.
8. RS-232C INPUT (Right-Eye Engine) (9-pin, female D-Sub)
Connect the Display Control output on the Secondary DHD Controller to this input.
9. DHD INPUT (Right-Eye Engine)
An HDCP-compliant digital video input for connecting the HDMI Out (To Display)
from the Secondary DHD Controller.
10. POWER INPUT (Right-Eye Engine – 100 to 240 VAC)
Connect the right optical engine to power here.
11. CINEWIDE/AUTOSCOPE +12V TRIGGER OUTPUT
Connect the AutoScope anamorphic lens transport (if present) to this output.
The Primary DHD Controller provides a video signal and OSD menu to the left-eye optical
engine of the projector. It controls the other D-73d system components in response to
user input via the following interfaces:
• Front-panel keypad
• IR remote control unit
• HDMI CEC messages
• RS-232 serial commands
• Ethernet
Figure 2-4 shows the controls and indicators on the Primary DHD Controller front panel;
the paragraphs that follow describe them.
4
1
Figure 2-4. Primary DHD Controller Front Panel
D-73d Series Installation/Operation Manual
D-73d
16:9
2 3
standby
HDMI 1
1080i/60
4
11
2.2
Primary DHD
Controller

Front Panel Layout

11 10 9
m
e
n
u
5 6 7 8
System Overview