Runco 3Dimension D-73d Ultra Installation & Operation Manual page 117

Table 5-1. Troubleshooting Chart (continued)
Symptom
AutoScope lens motor doesn't
work.
D-73d Series Installation/Operation Manual
Possible Cause(s)
• The motor is not plugged in
or the AC outlet is not
active.
• The motor is not connected
to the trigger output on the
projector.
Solution
• Ensure that the motor is
plugged in and that the AC
outlet is active.
• Check the trigger
connection between the
lens motor and projector
(Figure 3-8).
101
Maintenance and Troubleshooting