Table of Contents
Advertisement
Installation
Installing the Lens Motor:
1. Position the AutoScope lens motor as shown in Figure 3-7.
2. Line up the mounting holes on the lens motor housing with those on the underside of
the projector.
3. Secure the motor to the projector with the eight (8) supplied M6 x 12mm Pan-Head
Phillips screws.
Screw, Phillips
2
Pan-Head,
M6-1.0 x 12mm (8x)
Figure 3-7. AutoScope Lens Motor Installation
32
Q-1500d Series Installation/Operation Manual
1 AutoScope
Lens
Motor
Advertisement
Table of Contents
