Autoscope Lens Motor Installation - Runco Signature Cinema SC-30d Installation & Operation Manual

Installation
Install Lens Motor: Position the AutoScope Lens Motor as shown in Figure 3-8. Line up
the mounting holes on the lens motor housing with those on the underside of the
projector. Secure the motor to the projector with the four remaining Pan-Head Phillips
screws.
Figure 3-8. AutoScope Lens Motor Installation
After you have installed the AutoScope lens motor, proceed with Mounting the
SC-30d/SC-35d (page 34).
32 Runco SC-30d/SC-35d Installation/Operation Manual