Runco QuantumColor Q-1500d series Installation & Operation Manual page 111

Standby Mode: Select Standby Mode from the Service menu to control the DHD
Controller's power management feature.
• Choose Low Power (the default setting) to have the DHD Controller shut down
completely when it is turned off. This conserves power but increases the amount of
time required by the DHD Controller to start up when it is turned on.
• Fast Startup is a "quick-start" mode that keeps the DHD Controller running when it is
turned off, even though it appears to be in standby mode. This results in much quicker
startup times but consumes more power.
System Reset: To reset ALL controller settings (including image settings) back to their
factory defaults, choose System Reset from the Service menu.
A confirmation message appears. Select Yes to continue with the reset or select No to
cancel.
This action is not undoable. Proceed with caution! Before you
Caution
perform a System Reset, save your "Custom" Memory Presets
(page 76) and ISF Day/Night Memory Presets (page 83).
Q-1500d Series Installation/Operation Manual 95
Operation