Runco QuantumColor Q-1500d series Installation & Operation Manual page 33

1. RUNCO ICON
Lights blue to indicate that the Brightness Acceleration Engine is on or powering up.
2. MAIN POWER SWITCH
Disconnects or applies power to the Brightness Acceleration Engine.
3. POWER INPUT (100 to 240 VAC)
Connect the Brightness Acceleration Engine to power here.
4. HDMI 1 / HDMI 2 / HDMI 3 / HDMI 4 In (Digital)
HDCP-compliant digital video inputs for connecting an HDMI or DVI source.
5. Component / SCART In (3 x RCA connectors)
SD/HD input for connecting SDTV, EDTV or HDTV component video sources. Also
provides RGB input for SCART RGBS sources.
6. Video 1 / Video 2 / Video 3 In
Standard, composite video inputs for connecting a VCR, camcorder or other
composite video source. The Video 1 input also provides composite sync input for
SCART RGBS sources.
7. PRIMARY / SECONDARY Analog Out (5 x BNCs)
Two outputs (five BNCs per output) that connect to the HD2 input on the Primary and
Secondary DHD Controllers.
8. PRIMARY / SECONDARY Composite Video Out (RCA connector)
Two standard, composite video outputs that connect to the Composite 1 video input
on the Primary and Secondary DHD Controllers.
9. PRIMARY / SECONDARY HDMI Out
Two HDCP-compliant digital video outputs that connect to the HDMI 1 input on the
Primary and Secondary DHD Controllers. The Primary HDMI output also provides a
CEC channel for control messages.
10. HD1 / HD2 In (5 x Analog BNCs)
Two inputs (five BNCs per input) for connecting standard-definition (SD = 480i/576i),
enhanced-definition (ED = 480p/576p) or high-definition (HD = 720p/1080i/1080p)
component video sources, or RGBHV sources such as personal computers.
11. USB
A standard, USB Series "B" connection to a personal computer, for performing
software upgrades and other service procedures.
Q-1500d Series Installation/Operation Manual 17
System Overview