Table of Contents
Advertisement
FS-8700-127 Hanning & Kahl HCS-R Manual
5.3.2 Driver Specific Map Descriptor Parameters
Column Title
Function
Node_Name
Name of Node to fetch data from
For Passive_Client Map Descriptor specify whether data
HCSR_OnFrom
From Loop or On Loop or both should be stored.
For Passive_Client Map Descriptor specify loop number for
HCSR_Loop
which data should be stored.
Length of Map Descriptor
22 (min) for RDBC Map Descriptor:
24 if data_type is Dig_Input
Length*
21 for Passive_Client Map Descriptor.
It also depends upon HCSR_Data_Stages parameter
Refer to Appendix A.
Data_Type*
Specify how data will be stored. Refer to Appendix A.1
Specify the number of stages to keep history of data
HCSR_Data_Stages*
changes. 0 and 1 means no history
5.3.3 Timing Parameters
Column Title
Function
Scan_Interval
Rate at which data is polled
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.FieldServer.com
Tel: 408 262-2299 Fax: 408-262-2269 Toll_Free: 888-509-1970 email: support@FieldServer.com
Legal Values
≥0.001s
Page 8 of 17
Legal Values
One of the Node Names
specified in Section 5.2.
On, From, OnFrom
1,2,3,4
22 or 24, 21
Ana_Input
Digi_Input
0,1,2,3
Advertisement
Table of Contents
