Client Side Node Parameters; Client Side Map Descriptor Parameters; Fieldserver Related Map Descriptor Parameters - FieldServer Hanning FS-8700-127 Driver Manual

FS-8700-127 Hanning & Kahl HCS-R Manual
5.2

Client Side Node Parameters

Section Title
Nodes
Column Title Function
Node_Name Provide name for Node
Node_ID HCS-R station address of physical server Node
Protocol Specify protocol used
Connection Specify which port the device is connected to the FieldServer
Example
// Client Side Nodes
Nodes
Node_Name , Node_ID
PLC 1 , 240
5.3

Client Side Map Descriptor Parameters

5.3.1 FieldServer Related Map Descriptor Parameters

Column Title
Map_Descriptor_Name
Data_Array_Name
Data_Array_Offset
Function
2
Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction manual for details of the ports available
on specific hardware.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.FieldServer.com
Tel: 408 262-2299 Fax: 408-262-2269 Toll_Free: 888-509-1970 email: support@FieldServer.com
, Protocol , Connection
, HCS-R , P1
Function
Name of this Map Descriptor
Name of Data Array where data is to be
stored in the FieldServer
Starting location in Data Array
Function of Client Map Descriptor
Page 7 of 17
Legal Values
Up to 32 alphanumeric characters
240 (Protocol limit)
HCS-R
HCSR
H&K HCS-R
2
P1-P8
Legal Values
Up to 32 alphanumeric characters
0 to (Data_Array_Length-1) as specified
in Section 4.
0 to (Data_Array_Length-1) as specified
in Section 4.
RDBC, Passive_Client