Table of Contents
Advertisement
FS-8700-82 Carrier DataLink
5.3.
Server Side Map Descriptors
5.3.1.
Column Title
Map_Descriptor_Name Name of this Map Descriptor
Data_Array_Name
Data_Array_Location
Function
5.3.2.
Column Title
Node_Name
Data_Type
Length
Address
Table_Name
Field_Name
Field_Description
Field_Units
On_String
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com
FieldServer Specific Map Descriptor Parameters
Function
Name of Data Array where
data is to be stored in the
FieldServer
Starting location in Data Array
Map Descriptor function
Driver Specific Map Descriptor Parameters
Name of Node to fetch data from
This commonly used parameter is not required for this driver.
Length of Map Descriptor. When reading a
compete table, set the length to the maximum
number of data values to be stored. Refer to
1.1.
This commonly used parameter is not required for this driver.
The name of the table to be polled, e.g.
DISPLAY. Some system elements have
multiple instances of the same table name,
e.g. the Terminal System Manager has 64
Temperature Zone configuration tables
named TZONE1 though TZONE64. These
tables are accessed by using both the
primary & secondary table names, e.g.
'TZCONF TZONE1'
This is the field/table variable pneumonic.
Returned when a client does a table read. If
units have no meaning for the variable then
leave this field blank or use a single dash.
If the variable has a discrete state, use this
parameter to define the word that describes
the state when the variable's value is 1.
OR
Use one of the keywords to tell the driver to
send the value of the associated array
elements as a number (keyword=NUMERIC),
Up to 32 alphanumeric
characters
One of the Data Array names
from "Data Array" section
above
0 to maximum specified in
"Data Array" section above
Passive
Function
Page 15 of 31
Legal Values
Legal Values
One of the node
names specified in
"Server Node
Descriptor" above
1 – 1000
ASCII characters
only. When using
this parameter to
specify a primary
and secondary table,
leave a single space
between the two
names.
ASCII characters
only. No spaces,
maximum length 10
characters.
ASCII string which
may contain spaces.
NUMERIC
TIME
STRING
DOW
Or any other ASCII
string which may not
contain spaces.
Advertisement
Table of Contents
