Server Side Map Descriptors; Fieldserver Specific Map Descriptor Parameters; Driver Specific Map Descriptor Parameters - FieldServer Honeywell Zellweger IR-148 FS-8700-102 Driver Manual

FS-8700-102 Honeywell Zellweger IR-148-8_8-Channel Manual
6.3

SERVER SIDE MAP DESCRIPTORS

6.3.1 FieldServer Specific Map Descriptor Parameters

Column Title
Map_Descriptor_Name
Data_Array_Name
Data_Array_Offset
Function

6.3.2 Driver Specific Map Descriptor Parameters

Column Title
Node_Name
Length
Da_Byte_Array_Name*
Data_Byte_Offset*
Infra_Func*
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com
Function
Name of this Map Descriptor
Name of Data Array where data is to be
stored in the FieldServer
Starting location in Data Array
Function of Server Map Descriptor
Function
Name of Node to which data has to be sent.
Length of Map Descriptor
Name of Data Array used to lock the sensor. The
driver will report data for the locked sensor only.
Specifies offset into the Da_Byte_Array_Name Data
Array. This memory location will be checked when
the user has locked a sensor.
For quality assurance only:
This parameter is used to send a message to a Client
from a Map_Descriptor_Name*.ini file. The
Data_Array_Offset value will be used as the line
number from INI to send.
INFRA_SIMULATION: only the numbered line will be
sent.
INFRA_SIMULATION_ALL: Starting at the numbered
line all lines will be sent one by one until the end of
the file is reached.
INFRA_SIM_ALL_REPEAT: All lines from the
numbered line will be sent until the end of the file is
reached and then the cycle will repeat from the
numbered line.
Note: Ini must show all bytes as two character hex
representation and the first line should be
// FILE_IN_HEX_FORMAT
Legal Values
Up to 32 alphanumeric characters
One of the Data Array names
specified in Section 4.
0 to maximum specified in Section 4.
Wrbc
Legal Values
One of the Node names
specified in Section 6.2
1 to maximum specified in
Section 4.
One of the Data Array names
specified in Section 4.
0 to (Data_Array_Length-1),
Data_Array_Offset
INFRA_SIMULATION,
INFRA_SIMULATION_ALL,
INFRA_SIM_ALL_REPEAT,
-