Client Side Connection Descriptions - FieldServer Carrier DataLink FS-8700-82 Driver Manual

Fieldserver technologies computer driver instruction manual
Table of Contents

Advertisement

FS-8700-82 Carrier DataLink
Example
//
Data Arrays
Data_Arrays
Data_Array_Name,
DA_AI_01,
DA_AO_01,
DA_DI_01,
DA_DO_01,
4.2.

Client Side Connection Descriptions

Section Title
Connections
Column Title
Specify which port the device is connected to the
Port
FieldServer
Baud*
Specify baud rate
Parity*
Specify parity.
Data_Bits*
Specify data bits
Stop_Bits*
Specify stop bits
Protocol
Specify protocol used
Handshaking* Specify hardware handshaking
Poll _Delay*
Time between internal polls
When reading entire tables it is recommended that
Timeout*
the timeout be set to between 15 and 30 seconds.
Additional information is provided in Appendix A.5
When reading entire tables it is recommended that
IC_Timeout*
the ic_timeout be set to approx 15.0 seconds.
Additional information is provided in Appendix A.5
Example
//
Client Side Connections
Connections
Port, Baud,
Parity,
P8,
9600,
None,
1
Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction
manual for details of the ports available on specific hardware.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com
Data_Format,
UInt16,
UInt16,
Bit,
Bit,
Function
Data_bits,
Stop_Bits,
8
,
1
,
Data_Array_Length
200
200
200
200
P1-P8, R1-R2
300, 600 , 1200,
2400, 9600 (Vendor
limitation)
None (Vendor
Limitation)
8 (Vendor Limitation)
1 (Vendor limitation)
CarrrierDL
None
0-32000 seconds, 1
second
0.1 to 60.0 seconds,
2.0seconds
Protocol,
Handshaking,
CarrierDL,
None
Page 7 of 31
Legal Values
1
Poll_Delay
,
0.100s

Advertisement

Table of Contents
loading

Table of Contents

Save PDF