Client Side Connection Descriptions; Client Side Node Descriptors - FieldServer Envirotronics SystemsPlus FS-8700-88 Driver Manual

FS-8700-88 Envirotronics SystemsPlus
4.2.

Client Side Connection Descriptions

Section Title
Connections
Column Title
Specify which port the device is connected
Port
to the FieldServer
Protocol Specify protocol used
Baud* Specify baud rate
Parity* Specify parity
Data_Bits* Specify data bits
Stop_Bits* Specify stop bits
Handshaking* Specify hardware handshaking
Poll _Delay* Time between internal polls
Example
// Client Side Connections
Connections
Port, Protocol,
P1, SystemsPlus,
4.3.

Client Side Node Descriptors

Section Title
Nodes
Column Title
Node_Name
Protocol
Port
Example
// Client Side Nodes
Nodes
Node_Name,
SYSPLUS_01,
1
Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction
manual for details of the ports available on specific hardware.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
Function
Baud,
19200,
Function
Provide name for node
Specify protocol used
Specify which port the device is
connected to the FieldServer
Protocol,
SystemsPlus,
P1-P8
SystemsPlus
300 – 19200, standard baud
rates only
Even, Odd, None
7, 8
1, 2
RTS, RTS/CTS, None
0-32000 seconds, 1 second
Parity, Handshaking,
None, None,
Up to 32 alphanumeric
characters
SystemsPlus
P1-P8
Port
P1
Page 9 of 49
Legal Values
1
Poll_Delay
0.100s
Legal Values
1