Restore; Restore And Recovery Overview - HP Data Protector A.06.11 Integration Manual

media_group_name
medium_name
pipe_name
medium_type

Restore

Restore SAP DB/MaxDB objects in any of the following ways:
• Use the Data Protector GUI. See
• Use the Data Protector CLI. See
• Use the SAP DB/MaxDB utilities. See

Restore and recovery overview

This section provides an overview of restore and recovery process with regard to
Data Protector restore and recovery options selection. For a detailed description of
these options, see
At the beginning of a restore session, Data Protector switches the SAP DB/MaxDB
database to the Admin mode. If the database cannot be switched to the Admin
mode, an error is issued in the Data Protector monitor.
Depending on the type of restore and on the selected restore and recovery options,
the SAP DB/MaxDB database can be switched to the following modes after the
restore:
• If the Data Protector Recovery option is selected, the database is switched to
the Online mode after the restore.
• If the Data Protector Recovery option is not selected and archive logs have not
been restored (if restore from a full or diff backup session is performed), the
database remains in the Admin mode after the restore.
• If the Data Protector Recovery option is not selected and archive logs have been
restored, the database is, if the restored archive logs allow it, switched to the
Online mode. If the database, however, cannot be switched to the Online
mode (because the restored archive logs do not allow it), it remains in the Admin
mode.
Restoring using the Data Protector
Restoring using the Data Protector
SAP DB/MaxDB restore
Integration guide for Oracle and SAP
Name of the SAP DB/MaxDB media
group.
Name of the SAP DB/MaxDB medium.
Name of the SAP DB/MaxDB pipe.
Type of the SAP DB/MaxDB medium.
Restoring using SAP DB/MaxDB
options.
GUI.
CLI.
utilities.
255