Supported Usb Dvd Drives; Drive Configuration Hangs; Quick Restore Process - HP StorageWorks 1200s - NAS Release Note

Nas 1200s release notes

Hide thumbs Also See for StorageWorks 1200s - NAS:

Table of Contents

The Quick Restore DVD restores the NAS 1200s to its factory

default state.

Supported USB DVD Drives

This Quick Restore DVD is intended for DVD drives that have a

manually loading tray. If your DVD drive has an automatic tray,

ensure that the DVD is removed when it is ejected. Please refer

to the HP StorageWorks NAS 1200s QuickSpecs for a list of

supported USB DVD Drives.

The Quick Restore process includes a step to configure the

RAID 5 Data volume. The step may hang if the USB DVD drive

is disconnected before the entire Quick Restore process is

finished. The step takes approximately 30 minutes to complete.

If this step exceeds 30 minutes, the system should be restarted so

that the Quick Restore process can complete. To restart the

system, press the Windows key, then select Shut Down >

Restart

CAUTION: The NAS Quick Restore will erase all data on the

system drives. Refer to the HP StorageWorks NAS Administration

Guide and the HP StorageWorks NAS Installation Guide for

information on backing up data prior to performing a Quick

Restore procedure..

HP StorageWorks NAS 1200s Release Notes

Table of Contents