HP Data Protector A.06.11 Integration Manual page 222

1. Verify backup directly to disk as follows:
brbackup -d disk -u user/password
If this fails, check the error messages and resolve possible problems before you
continue.
2. Verify restore directly to disk as follows:
brrestore -d disk -u user/password
If this fails, check the error messages and resolve possible problems before you
continue.
3. If you are running backups in RMAN mode, verify backup and restore directly
to disk using Recovery Manager channel type disk as follows:
a. Re-link the Oracle Server with the Database Library provided by SAP
(libobk.sl).
For each RMAN channel, set the SBT_LIBRARY parameter to point to the
libobk.sl file.
IMPORTANT:
Before you can use Data Protector again in the RMAN mode, you have
to re-link the Oracle again with the Data Protector Database Library.
b. You have to define the parameter init in the initialization file
initORACLE_SID.ora.
Run the following commands:
brrestore -d pipe -u user/password -t online -m all
brrestore -d disk -u user/password
If this fails, refer to the SAP Online Help to learn how to execute backup
and restore directly to disk using the SAP backup utility.Check the error
message and resolve this issues before you continue.
222 Integrating SAP R/3 and Data Protector