Ricoh C6055 Operating Instructions Manual page 119

• With Image Rotation
Use to copy when using the Auto Tray Switching function.
• Without Image Rotation
Only copies with Auto Tray Switching if you load paper of the same size and in the same
orientation in two or more trays. If the paper is not the same size or in the same orientation,
copying is interrupted and the message "Load paper." is displayed.
• Off
When a paper tray runs out of paper, copying is interrupted and the message "Load paper." is
displayed.
Alert Sound: Original left on Exposure Glass
The beeper (Key tone) sounds if you forget to remove originals after copying.
The default setting is On.
If Panel Key Sound of General Features (System Settings) is [Off], the beeper does not sound
irrespective of the "Alert Sound: Original left on Exposure Glass".
Job End Call
Choose whether or not the beeper sounds when copying is complete.
The default setting is On.
If Panel Key Sound of General Features (System Settings) is [On], the machine beeps to notify you
that it did not complete a job for reasons such as copying was interrupted, the paper tray ran out of
paper, or a paper jam occurred.
Connect Copy Key Display
Specify whether or not to display the key for Connect Copy.
The default setting is On.
Switch Original Counter Display
Specify the original counter display.
The default setting is Original Sheet Counter.
Customize Function: Copier
You can assign up to six frequently-used functions to Copy Function keys.
General Features
3
117