Status Window [ <#Window-Name> | * ]; Stix [Reset]; Stncom_Prompt "<Text - HP NonStop SSH 544701-014 Reference Manual

•
ABORTED
The session has been aborted, but is being left up for a short time to allow the user at the remote SSH 6530
client to notice and read error messages that describe the reason for session termination.
•
RSCMGR_BUSY
For dynamic sessions, all resource managers are presently busy with other new dynamic session requests.
•
DYN_PROC_LAUNCH
For dynamic sessions, the associated process is being launched.
•
DYN_PROC_OPEN_TO
For dynamic sessions, the associated process is being opened to write the startup message.
•
DYN_PROC_SUMSG
For dynamic sessions, the startup message is being written to the associated process.
•
DYN_PROC_OPEN_FROM
For dynamic sessions, the associated process has been launched and has received the startup message, but has
not yet opened the STN window.
•
CONNECTED
The session is connected to a window. If a service is associated with the session, its name is displayed.
•
PTY_INIT
An SSH2 process has created the pseudo terminal (PTY) under its control. Any application processes on the
terminal are started by SSH2.
STATUS WINDOW [ <#window-name> | * ]
Displays current status information for the specified windows or for all windows. The output format for sessions created
via SSH is as follows:
WINDOW <name> <status> <ipaddr> <a> application openers
<name>
Window name e.g. #ZWN0002.
<status>
STARTED (not in session), STOPPED, or IN SESSION.
<ipaddr>
remote client node address.
<a>
Indicates that either "no" or "1 or more" applications have this window open.

STIX [RESET]

Displays cumulative statistics on the number of sessions. STIX displays the counters; STIX RESET displays then resets.
STNCOM_PROMPT "<text>"
This command redefines the prompt sent by STNCOM to the terminal for new command input. This requires the H39
version of STNCOM.
248 • STN Reference
HP NonStop SSH Reference Manual