Backupcpu; Banner - HP NonStop SSH 544701-014 Reference Manual

Considerations
•
Any automatically added user will have the same attributes as the default user, except user name and system-
user.
•
In case the parameter AUTOADDSYSTEMUSERSLIKE is set to the name of a user not defined in SSHCTL
and AUTOADDSYSTEMUSERS has a value of TRUE, then any authentication of a new user will be rejected.
Default
If omitted, a user is added with hard-coded default values if AUTOADDSYSTEMUSERS has a value of TRUE.
Example
AUTOADDSYSTEMUSERSLIKE comf.us
See also:
AUTOADDSYSTEMUSERS, USETEMPLATESYSTEMUSER

BACKUPCPU

Use this parameter to run as a NonStop process pair.
Parameter Syntax
BACKUPCPU [NONE|ANY|cpu]
Arguments
NONE
SSH2 will not run as a process pair.
ANY
SSH2 will run as a nonstop process pair and will automatically select an available CPU for the backup process.
cpu
A number value that represents a CPU on your system. SSH2 will run as a nonstop process pair and will start
the backup process in the specified CPU.
Considerations
To learn more about how SSH2 can help users leverage the fundamentals of the NonStop system to provide nonstop SSH
access, please refer to the "NonStop Availability" section.
Default
If omitted, BACKUPCPU is set to NONE.
Example
BACKUPCPU ANY

BANNER

Use this parameter to configure an authentication banner message to be displayed to SSH clients connecting to the SSH2
daemon.
Parameter Syntax
BANNER * | filename
Arguments
HP NonStop SSH Reference Manual
Configuring and Running SSH2 • 63