Loglevelcache; Loglevelconsole - HP NonStop SSH 544701-014 Reference Manual

•
This parameter is retained for downward compatibility only and has been replaced by the
LOGLEVELCONSOLE and LOGLEVELFILE parameters.
•
If no value is set for the LOGLEVELCONSOLE or LOGLEVELFILE parameters, they will inherit their value
from the LOGLEVEL parameter.
•
If both LOGLEVELCONSOLE and LOGLEVELFILE parameters are assigned a value, the LOGLEVEL
parameter becomes meaningless.
See also:
LOGLEVELCONSOLE, LOGLEVELEMS, LOGLEVELFILE

LOGLEVELCACHE

Use this parameter to control what messages are written to the log cache.
Parameter Syntax
LOGLEVELCACHE detail
Arguments
detail
A number specifying the detail level.
Default
A default of 50 is used.
Considerations
•
Using the LOGLEVELCACHE parameter allows users to set a different log level for the log messages written
to the log cache than for the output written to LOGFILE.
•
Writing log messages to the log cache and writing the current content to the log file sporadically as required can
reduce the number of disk operations needed for logging.
•
The size of the log cache can be configured.
•
The content of the log cache can be written to the configured LOGFILE.
•
The format of log message written to the log cache is determined by the setting of LOGFORMATFILE.
See also:
LOGLEVELSIZE, LOGLEVELFILE

LOGLEVELCONSOLE

Use this parameter to control what messages are written to the log console.
Parameter Syntax
LOGLEVELCONSOLE detail
Arguments
detail
A number specifying the detail level.
Default
HP NonStop SSH Reference Manual
Configuring and Running SSH2 • 87