GWN
[ALLOC]
This command always displays current information.
•
GWN File name (or blank)
•
Blocksize
•
Next window name
•
Last window name allocated (same as next if no GWN File)
•
Maximum window number
If ALLOC is specified, a new block of session names is allocated from GWN^FILE. Since allocation is normally done
automatically, ALLOC is intended for development use only. Any window names reserved by a previous GWN^FILE
allocation but not yet used are discarded. The next session will begin with the number just allocated.
GWN Related EMS Events
EMS events are generated at GWN initialization, whenever allocations are made from GWN^FILE, and whenever any
errors occur. Refer to the section on EMS events.
EMS Events
The STN subvolume contains standard EMS files which provide additional details:
•
ZSTNTMPL template input source
•
ZSTNDDL
DDL for event names
•
ZSTNTMPL template output file for EMSDIST
It is recommended that ZSTNTMPL be installed using standard procedures.
zstn-evt-socket-err
"<STN process name> Subnet <2> <3> socket error <4>"
•
CAUSE: An error occurred on TCP/IP process <2> for operation <3> with error code <4>.
•
EFFECT: For listener related errors (accept_nw, bind_nw, socket_nw), the listener is stopped and automatically
restarted. For other error codes, which are all related to a specific session, the session is terminated.
•
ACTION: If the error persists, contact support.
zstn-evt-listener-up
"<STN process name> Subnet <2> Port <3> Listener now UP"
•
CAUSE: The listener attached to TCP/IP process <2> port number <3> initialized successfully.
•
EFFECT: The listener is ready to accept new session requests.
•
ACTION: None; informational only.
zstn-evt-listener-down
"<STN process name> Subnet <2> Port <3> Listener now DOWN"
HP NonStop SSH Reference Manual
value is 1000
value is 1001
value is 1002
STN Reference • 255