HP NonStop SSH 544701-014 Reference Manual page 308

Table of Contents

Advertisement

<error number detail>
Is the detail error number that was raised by the PROCESSCREATE function.
Cause: PROCESSCREATE failed with an error
Effect: The channel request (e.g. subsystem SFTP) fails which the process (e.g. SFTPSERV) should be created
for.
Recovery: Check the NonStop server documentation for PROCESSCREATE error descriptions. If SFTPSERV
could not be started make sure the program is located in the same directory as SSH2.
<session id>: SFTPSERV process initialisation failed, error <error number> during
startup procedure
<error number>
Is the error number that was raised during the initialization of the SFTPSERV process.
Cause: An error occurred during the initial inter process communication with the SFTPSERV process.
Effect: The channel request for the SFTP subsystem is rejected.
Recovery: Check if SFTPSERV abended during the initialization procedure. Contact comForte if this problem
persists.
<session id>: forwarding from <host>:<port> to <target-host>:<target-port> denied
<host>
Is the IP address of the socket client the SSH client tries to forward a connection from.
<port>
Is the IP address of the socket client the SSH client tries to forward a connection from.
<target-host>
Is the IP address the SSH client requested to forward the connection to.
<target-port>
Is the port number the SSH client requested to forward the connection to.
Cause: An SSH client requested the forwarding of a connection. However, this has been administratively
prohibited, e.g. by setting the ALLOWTCPFORWARDING parameter to FALSE.
Effect: The forwarding request is rejected.
Recovery: If forwarding is desired, check the setting of ALLOWTCPFORWARDING.
<session id>: forwarding <protocol> connection from <host>:<port> to <target-
host>:<target-port>
<host>
Is the IP address of the socket client the SSH client tries to forward a connection from.
<port>
Is the IP address of the socket client the SSH client tries to forward a connection from.
<target-host>
Is the IP address the SSH client requested to forward the connection to.
308 • Troubleshooting
failed (<error detail>)
HP NonStop SSH Reference Manual

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents