Clear Logcache; Flush Logcache; Info Define - HP NonStop SSH 544701-014 Reference Manual

[def ] STOREDPASSWORDSONLY
[def ] STRICTHOSTKEYCHECKING <TRUE>
[def ] SUBNET
[def ] SUPPRESSCOMMENTINSSHVERSION <FALSE>
[def ] TCPIPHOSTFILE
[def ] TCPIPNODEFILE
[def ] TCPIPRESOLVERNAME
-----------------------------------------------------------
Current configuration:
LOGCONSOLE
LOGEMS
LOGFILE
LOGFORMATCONSOLE
LOGFORMATEMS
LOGFORMATFILE
LOGLEVELCONSOLE
LOGLEVELEMS
LOGLEVELFILE
LOGMAXFILELENGTH
LOGFILERETENTION
LOGMEMORYDETAILED
LOGCACHESIZE
LOGLEVELCACHE
LOGCACHEDUMPONABORT 1
AUDITCONSOLE
AUDITEMS
AUDITFILE
AUDITFORMATCONSOLE
AUDITFORMATEMS
AUDITFORMATFILE
AUDITMAXFILELENGTH
AUDITFILERETENTION
%

CLEAR LOGCACHE

If a log cache is written (see parameters LOGLEVELCACHE, LOGCACHESIZE), the command CLEAR LOGCACHE
can be used to clear the cache. It has the following syntax:
CLEAR LOGCACHE
The original content of the log cache is lost when executing this command.

FLUSH LOGCACHE

If a log cache is written (see parameters LOGLEVELCACHE, LOGCACHESIZE), the command FLUSH LOGCACHE
can be used to write the content of the log cache to the configured log file (parameter LOGFILE must not be set to a
value of * to be able to flush the log cache). It has the following syntax:
FLUSH LOGCACHE
The log cache will be automatically cleared after the content of the log cache was written to the current log file.

INFO DEFINE

The INFO DEFINE command displays information about the DEFINEs as they exist in the SSH2 process context. It has
the following syntax:
142 • SSHCOM Command Reference
<FALSE>
<$ZTC0>
<*>
<*>
<*>
%
*
*
93
16
93
50
20
50
20000
10
0
1024 (current number of messages in cache: 0)
0
*
*
*
0
0
21
20000
10
HP NonStop SSH Reference Manual