Settings Page (Linux Failover Driver Only) - Qlogic SANsurfer FC HBA Manager User Manual

A
Figure 6-15 Settings Page (Linux Failover Driver Only)
The identifying information includes:
3. Under Target: Display Options, click one of the following to specify
whether only targets configured using SANsurfer FC HBA Manager are seen
by the system:
SN0054651-00 B
Hostname is the name or IP address of the host connected to the
HBA.
HBA Model is the QLA2xxx HBA model number.
If you want the system to see all targets at all times whether or not the
target was configured with SANsurfer FC HBA Manager, click Present
targets that are persistently bound plus any new target(s) with
driver defaults.
If you want the system to see only targets configured using SANsurfer
FC HBA Manager, click Present persistently bound target(s) Only.
(Linux failover driver only) If you want the system to see only targets
with driver defaults, click Present target(s) with driver defaults. This
option is available only for Linux operating systems.
NOTE:
If you select the Linux option Present target(s) with driver
defaults, the system ignores persistent data.
6 – Getting Started
Specifying the HBA Driver Settings
6-29