Setting The Hba Event Log Option; Options Dialog Box: App Event Log - Qlogic SANsurfer FC HBA Manager User Manual

A
Figure 6-8 Options Dialog Box: App Event Log
2. Under App Event Log, type the number of events that the event log can list
in the Log Size box. The range is 20 to 200 events; the default is 20 events.
3. If you want to enable logging of informational events, select the Log
Informational Events check box.
4. If you want to enable logging of warning events, select the Log Warning
Events check box.
5. When you finish making selections, do one of the following:

Setting the HBA Event Log Option

Follow these steps to set the number of events the HBA Event Log can list.
NOTE:
For information about viewing the HBA event log, see
Managing the HBA Event Log
To set HBA event log options:
1. To access the Options dialog box, choose one of the following methods:
SN0054651-00 B
To save the changes and close the Options dialog box, click OK.
To close the Options dialog box without saving any changes, click
Cancel.
On the SANsurfer FC HBA Manager main window, open the Settings
menu, and then click Options.
Setting the HBA Event Log Option
in the help system.
6 – Getting Started
Viewing and
6-19