Install Sansurfer: Select Shortcut Profile (Windows Only) - Qlogic SANsurfer FC HBA Manager User Manual

A
7. Respond to the previous installation message:
a.
b.
If you are installing the SANsurfer FC HBA Manager user interface on a
Windows system (except Windows Vista or Windows 2008 Server), the
Select Shortcut Profile dialog box opens
Figure 5-8 Install SANsurfer: Select Shortcut Profile (Windows Only)
SN0054651-00 B
If the SANsurfer tool is currently running, exit SANsurfer before
proceeding with the installation.
Choose one of the following options:
If you want to uninstall the previous version, click Yes. The
previous version is uninstalled.
NOTE:
If you are installing on a Windows system and you are prompted
to reboot the system after the uninstall is complete, be sure to
reboot before installing in the same directory as the currently
selected directory. Otherwise, the newly installed tool will not
operate properly.
If you do not want to uninstall the previous version, click No. If
the previously installed version resides in the same directory as
the currently selected directory, the previous version is
overwritten.
5 – Installing SANsurfer FC HBA Manager
(Figure 5-8).
Initial Installation
5-11