Network Does Not Use Proxy Settings; Network Requires Proxy Settings; Update Sansurfer: Server Proxy Settings Dialog Box - Qlogic SANsurfer FC HBA Manager User Manual

A

Network Does Not Use Proxy Settings

Follow these steps to update SANsurfer from the QLogic Web site when your
network does not use proxy settings to access the Internet.
To update SANsurfer (network does not use proxy settings):
1. On the Select Update dialog box
website.
2. Clear the Specify Proxy Settings check box.
3. Click Continue. If updates are available, the Update dialog box opens
(Figure
updates.

Network Requires Proxy Settings

Follow these steps to update SANsurfer from the QLogic Web site when your
network requires proxy settings to access the Internet.
To update SANsurfer (network requires proxy settings):
1. On the Select Update dialog box
website.
2. Select the Specify Proxy Settings check box.
3. Click Continue. The Server Proxy Settings dialog box opens
Figure 5-17 Update SANsurfer: Server Proxy Settings Dialog Box
4. If you want the HTTP proxy setting to be detected automatically, leave the
dialog box as is, and then click OK to continue.
If you want to specify the server proxy settings, complete the following:
a.
b.
c.
SN0054651-00 B
5-18). Otherwise, a message box informs you that there are no
Select the Use the following HTTP proxy setting check box.
In the Address box, type the http address.
In the Port box, type the port ID of the proxy server.
5 – Installing SANsurfer FC HBA Manager
Web- and CD-Based Installation Updates
(Figure 5-16), click From the QLogic
(Figure 5-16), click From the QLogic
(Figure 5-17).
5-21