Introduction; What's In This Guide; Sansurfer Fc Hba Manager User's Guide; Features - Qlogic SANsurfer FC HBA Manager User Manual

1

Introduction

The

SANsurfer FC HBA Manager User's Guide

Manager tool, a comprehensive tool for configuration and management of QLogic
SANsurfer Fibre Channel (FC) host bus adapters (HBAs) and Fibre Channel over
Ethernet (FCoE) converged network adapters (CNAs) used in storage area
networks (SANs).
NOTE:
Throughout this guide, HBA and adapter are used interchangeably, as are
the terms target and device.

What's in this Guide

This guide contains the basic information you need to get started with the
graphical user interface (GUI) based SANsurfer FC HBA Manager management
tool. For detailed information about the features and functionality not covered in
this guide, refer to the help system (see
This introductory section explains the typographic conventions used in this guide,
lists related documents, specifies the intended audience, refers you to the QLogic
license agreements, and provides technical support and contact information.
The remainder of the user's guide contains the following sections and appendices:
Section 2 SANsurfer FC HBA Manager Overview
SANsurfer FC HBA Manager.
Section 3 System Overview
of devices controlled by SANsurfer FC HBA Manager.
Section 4 System Requirements
requirements needed for optimum SANsurfer FC HBA Manager
performance.
Section 5 Installing SANsurfer FC HBA
and uninstall SANsurfer FC HBA Manager.
SN0054651-00 B
describes the SANsurfer FC HBA
"Getting Help" on page
describes the features of
outlines the hardware and software installation
lists the hardware and software
Manager.describes how to install
6-12).
1-1