Previous Sansurfer Install Detected Message - Qlogic SANsurfer FC HBA Manager User Manual

5 – Installing SANsurfer FC HBA Manager
Initial Installation
6. Select an install location using one of the following methods:
NOTE:
If there is a previous version of the SANsurfer tool on the system, the
Previous SANsurfer Install Detected message box appears
Figure 5-7 Previous SANsurfer Install Detected Message
5-10
For NetWare, select the drive mapped to the NetWare server (always
select a location other than the default).
To accept the destination location shown in the dialog box and
continue, click Next (recommended).
The default location for a Windows system is:
C:\Program Files\QLogic Corporation\SANsurfer
The default location for a Red Hat/SuSE Linux and Solaris SPARC/x86
system is:
/opt/QLogic_Corporation/SANsurfer
To select a different location:
a. Click Choose, and then select an installation location.
b. On the Choose Install Folder dialog box, click Next.
If you selected a different location and want to reselect the default
location:
a. Click Restore Default Folder.
b. Click Next.
S
(Figure 5-7).
SN0054651-00 B